Text Box: This one here is pretty Special. It is the tightest known 120 AC hard wired surge suppression device on the market.  This is an in-line series 120 volt three stage in series design that is perfect on sub panels as well as on PLC and controls .  You will find most of these on Fire alarm panels nation wide and recommended by the manufacture and will not violate UL864.
ETL listed according to UL 1449 4th edition (New) which requires a product like this to prevent reverse polarity.

Keep in mind all others are usually rUL and considered a component which violates UL 864 and other related UL related requirements.  There is no other product like this on the market today.

Main Panel and Sub-Panel Protection

Stormin Protection Highest Performance rated panel mount surge suppression for the most sensitive electronic equipment down line from it. 200 and 300 KA surge current ratings with the tightest 330 Volt let through UL rating on the market.

Developing a successful Power quality System we should first start out with the basics.


1.        The Most KA rating for the buck.

2.        The best possible warranty

3.        The best performance under test.

4.        UL 330 rating… if  you can find it and we have!


1.        What you don’t need to spend extra for:

2.        Dry contacts...no one uses them.

3.        Surge Counters, no one reads them

4.        Modular plugs, no one looks at them or know where to get replacements. Worst yet, the manufacture may have been sold.

5.        A company that only specializes on panel mount protection but not any other protection devices.  That tells me that if anything goes wrong, there is no value added service or trouble shooting.  Complication may not be the protector, rather the back door or your system.

6.        A brand name that is over $2000.00 and a low KA surge current capacity.


This leaves us with two possible products and Lectra Shield (formally E/Clips) products does top the list and you get more bang for the buck + excellent reputation.


Text Box: Stormin Protection strongly believes in power quality surge suppression on the main and sub-panels.  200KA and 300KA surge current capability are very important.


Phone: 888-471-1038

Phone: 727-823-6100

Fax: 727-823-6044

To contact us:

Click here

UL 1449 4th Edition

ETL listed and tested according to UL 1449 4th edition requirements (new).



Type 1 SPD


Type 1 SPD


Type 1 SPD


Type 1 SPD


Type 1 SPD


Type 2 SPD