Challenge Technology
CCTV BNC C/V
CCTV BNC V
CCTV IsoBNC C/V
CCTV Iso BNC V

See demo surge testing

Coaxial Cable Line Surge SuppressorText Box: CCTV BNC V coaxial video line surge suppressor incorporates state-of the-art technology and provides multiple elements of protection for your sensitive video equipment.  Tested to ANSI/IEEE B ring wave standards that exceed normal UL 497 B testing standards by 90 times.  Unlike other video line surge suppressors, CCTV BNC V coaxial video line surge suppressor does not employ MOV technology and will not cause high insertion loss on your coax lines.  CCTV BNC V coaxial video line is self restoring after each surge with ratings.  CCTV BNC V coaxial video protector does not have a ground wire, or lug that will promote ground loops into your camera, monitor or multiplexer. CCTV BNC V coaxial protector is design to absorb the surge between the shield and line.

Warranty

 

Stormin Protection surge suppressors have a five year Product Warranty.  Please see warranty statement for complete product warranty information.

Special note:

Allied Systems  has invented two new items to consider:

1.         A coaxial protection device with a isolation transformer design and surge suppression for BNC application that works just like a balums, but has surge suppression built in it.

2.         PTZ device that has isolation design, voltage regulator that corrects SMT burn out due to voltage drop and too much current (ohms law). This product resolved several Pelco Pan Tilt and Zoom Equipment.

 

Use on the switcher or multiplexer.

CCTV BNC C/V 16 BNC & CCTV ISOBNCC/V 16BNC

Most popular Coax protection

CCTV BNC C/V

CATV 24 V AC  power protection

Custom Industrial Package for extreme environmental condition with Ground Isolation Transformer

Pan Tilt and Zoom protection

RS422

(1 pair wire protection) DDual 2WDTB/G 5V or 16 V

RS485

(2 pair wire protection) DDual 4WDTB/G 5V or 16 V

Optelator or II 

Use on CO, modem, phones 

5” of Fiber Optic isolation between Telco input and output.

Use on specialty applications that require total ground loop isolation

Also available are RS485/serial port conversion from wire to fiber and back again.

CCTVISOBNC/V

Transformer design eliminates ground loops with the same surge protection

CCTV Surge Suppression

How about something for your 18” RCA Dish for Direct TV Sat. Protection?

Enclosures
Click here

CCTV Surge Suppression

Contact

Phone: 888-471-1038

Phone: 727-823-6100

Fax: 727-823-6044

To contact us:

CATV Power with Grounds

CATV 24V AC  w Ground (Parallel) 

CATV12V AC w Ground (Parallel)

CATV 12VDC w Ground (Parallel)

 

CCTV Power (with out grounds )

DDual2WDTB/24V AC –no Ground     

DDual2WDTB/12V AC –no Ground

DDual2WDTB/ 24V DC-no Ground     

DDual2WDTB/12VDC-no Ground

 

UTP Cameras Video-Cat 5 Twisted Pairs

DDual2WDTB/5V  Video No Ground

DDual2WDTB/5V Video Ground

 

UTP Camera Video-Cat 5 Twisted Pairs

Isolation Transformer (used for special grounding issues)

VideoISO2WDTB/G  (with ground)

VideoISO2WDTB  (with out ground)

 

Notation: the Isolation Transformer will cause considerable insertion loss in signal.  If using CAT 5 wire should limit the problem and the possibility of more then one unit may be used to eliminate Ground loops.  If in doubt, call  

Camera Isolator
Physical Isolation
see further to the 
bottom of the page.
or click here

UPS & AVR Adapter with a Spike Block Installed.

Full AC Isolation +Voltage Regulation and prevention of a bi-directional ground

Rack Mount UPS and Rack  mount CCTV/and Power Supplies

BX-V010 AC Power

New technology in plug in protectors that have both surge suppression and power monitoring and time delay disconnect capabilities.  Perfect for Back up Generator provided power and lack luster UPS’s.