UPS’s

Contact

And E-mail

Ph: 713-468-3573

Fax: 713-468-3721

Fax: 727-823-6044

To contact us:

New invention, and one of a kind UL listed device for the ground side.  Very important for use in Florida, because of Florida’s poor grounding soil content. It is also considered by the military as an anti-terrorist device. Excellent for Home Land Security & CCTV systems. Can be installed inside 1000VA, 1500 VA, & 2000 VA.  Can be installed outside of smaller UPS.

RSO-08T

Stormin Protection

Rackmount 9 outlet surge suppressor with 15 foot cord

Spike Block-1

UL listed Ground Filter that eliminates ground loop problems on Phone System AC and case grounds.  This device can be installed inside all 1000 VA UPS and higher.  According to UL, all UPS has a continues ground, and does not have anything on them to prevent lightning to come up a bi-directional ground. 

BX-V010

New technology in plug in protectors that have both surge suppression and power monitoring and time delay disconnected capabilities. Prefect for back up Generators proved power and lack luster un-regulated power.

Question: Why do surge suppression do not work and this does? Answer: Surge suppression for AC does not see low voltage and over current. This current is what always destroys switch mode power supplies.  So what is the risk?  All power supplies that have thermal fusing is susceptible to over current thermal run-away.  This product has both surge suppression and an intelligent circuit to monitor the power.  If there is a voltage drop, it kills the power, once the power is stable, it allows the power to go through in about three minutes.

Special settings and switches

Not many surge suppression that is a single outlet actually has an off and off switch.  This unit does.  On the back of the unit as you notice, there is a switch that you can adjust the cut off voltage for a voltage drop.  The lowest setting is 90Volts, and the highest setting  is 105 volts.  At the very highest setting for over voltage there is a setting at 138V AC.  Preferences is that the unit be set on 105 Volts if you use a UPS back up, and the lowest setting as a stand alone.

Uninterruptible Power Supplies UPS

Power Quality Engineering also can lead you to special needs like 2000 VA UPS for phone systems.  Industrial grade UPS, which out performs store bought UPS.    There are four kinds of UPS.  Standard Back Up (store bought, APC, Triplite, and other name brands), Standby Smart UPS, On Line UPS, True On Line UPS, Double Conversion True On line UPS, Triple Conversion True On Line UPS. 

 

The secret behind buying a UPS, is to size it for the actual VA value or wattage value and how much time do you need back up power. It is a mathematical process + power factor Engineering equations to get the right size you need plus the right amount of uptime.   Liner loads uses more power then a switch mode power supply,  so there might be reasons you need a professional to help you make the right chooses.

 

Here is a little math Volts x your Amps actual draw = VA, add 1/3 more for liner power supply + 50 VA for Start up because phones systems draw more power during a cold start.