_______________________________________________________Main and Sub-Panel Protection
Panel surge suppressors mount on the load side of main and sub
panels. Panel Protectors, often called facility protectors, protect your
main circuits from surges and spikes associated with lightning, grid
switching, and inductive loads within your own facility. When used in combination with low pass voltage AC plug-in surge
suppressors, complete AC equipment and systems protection can be achieved.
Scepter Box 2 lbs.
2.5”x 4.75”x 5.8” including tabs.
Common Specifications for Main and • UL
and CUL Listed TVSS 1449 2nd Edition • UL
330 Rating for 120, 240, 208 3 Wye, 240 Delta • Response
Time: <5 Nanoseconds • Voltage:
Voltage Sensitive • Maximum
Surge Current 120 – 240 single phase 200KA, 208 to 480 three phase 300KA
surge current • Maximum
Surge Voltage (1.2x50us): 10,000
Volts • Current: Non-load
Bearing Parallel
Installation • Follow
on Current: None • Operating
Temperature: - 40 + 850C • Fail-Safe
Operation • Multi-Stage
Design with thermal fuses. • Installation
Configuration: Parallel Design • Protection
Modes: Phase/Phase Phase/Neutral Phase/Ground Neutral/Ground • Redundant
Circuitry • Meets
or Exceeds ANSI/IEEE Standard 587 (C62.33, C62.41, C62.45) • Enclosure:
CUL & UL Listed 514, 61E8 & CSA Approved CUL & UL
Listed - Marine Rating - Weather Proof • Operating
Environment: Exterior/Interior
applications Weather
Proof/Completely Encapsulated • Clamping Voltage: 120 Volt
Units 130 VRMS 208/240 Volt
Units 250 VRMS 480 Volt
Units 510 VRMS The above
products are available with LED
status indicators only. Note: These items con he Custom manufactured
with any voltage or plug configuration. Marine Rated units and Hardwire
Twist lock Units are also available upon request. Surge Suppressors 7 The above
products include LED indicators to show operation status per phase. Hoffman Box (480 Three Phase Wye and Delta Surge Suppressor Box 38
lbs.) The above products are available with LED status indicators Branch Circuit Protection do not need to meet the same requirements
as the 1449 2nd Edition products, but they exceed all
requirements and a whole lot more and they are UL 1449 2nd
Edition. Joules
Volt Amps(VA) HARD WIRE BRANCH CIRCUIT 120 HWCP 15 120 V AC,
3-Wire, 15 amp, LED 540 5,850,000 Professional Engineering Specifications for the
120HWCP20CB
Sub-Panel
Protectors
Product Description Power Dissipation
120 HWCP 20 120V AC, 3-Wire,
20 amp, LED 600 6,500,000
120 HWCP 2OCB 120 V AC, 3-Wire, 20
amp, LED, 600 6,500,000
20
Amp Circuit Breaker Click to Page 29
Surge Suppressors
Click here for Index Click here for Page 6 Click here for Page 8 Page 7
Stormin Protection
Products Inc.
10749 63rd
Way N.,
Pinellas Park,
FL. 33782
888-471-1038 Toll
Free
727-548-5418 Phone
727-548-0867 Fax