Primary Telephone & Modem Surge Protection

Primary Telephone & Modem Surge Protection

Specifications for Telephone - Single Stage

Connects to the M-66 Telco Block

Other voltages available on request

• Voltage Available: 15V, 30V, 60V & 200V for Ring-up

   lines

• Response Time: 5 Nanoseconds

• Non Load-Bearing/Voltage

• No follow - on current

• Single Stage - 400,000 VA Protection per pair @ 8 x 20~is

• Instant Reset/Long Life

• Dimensions: 3” x 1 ½” x 1”

Down Load These Specs

Telephone - Three Stage

DLT T0S DTB (XXX)**   Telephone System Protector

DLT TOS 200V

200 Volt Telephone System

Protector - PTSU/RSTU

Printed Circuit Board Cards

for Toshiba, Panasonic, or SMT Hybrid Phone Systems

** Specify Voltage Required

(XXX = I5V, 30V, 60V, 200V)

          Specifications for Telephone -

Three-Stage Hardwire

• Connection:                             Terminal Board or RJ11
• Technology:                            Hybrid Circuitry
                                                Multi-Stage Design
                                                Full Heat sinking
• Response:                               < 5 Nanoseconds
• Operating Temperature:           -40⁰C - ±85⁰C
• Voltage:                                  Voltage Sensitive
• Current:                                  Non Load-Bearing
                                                No Follow -On Current
• Clamping Point:                       15, 30, 60, 200 Volts or
                                                Special
• Power Dissipation:                   2,000,000 Volt Amps
                                                4,000.000 Volt / Line Pair
• Lines Protected:                      l Pair

• Tested to ANSI/IEEE B-3 Impulse

                                                             UL 497 listed

Down load These Specs